Bad or Poor Installation of Roof
If you are a homeowner, you have most likely encountered roofing problems at a certain point in your life. Roofing problems could range starting from small leaks to major cracking. Roofs often suffer from several common problems that call for immediate attention.
Choosing poorly skilled or inexperienced roofing contractors could cost you more money in the long run. In fact, poorly installed roofs often lead to higher expenses down the road once problems arise that would not have occurred if you used a professional abilene roofing contractor.
Roof leaks are one of the most common roofing problems that you could experience. From cracked flashing to damaged shingles, slates, or tiles. Roof leaks have an inclination to happen in the following areas of your house:
- Beneath damaged shingles
- Around gutters
- In low valleys or spots
- At flashing points
If you notice indications of leaks, including damp walls or discolored ceilings, call a professional roofing contractor for an inspection.
The time your gutters are clogged, broken, or defective, water could be backing up into the system. This can ultimately cause water to leak into the attics, where it could lead to decay. A regular check on your gutters for debris or broken parts can avoid such damage from occurring.
Tip: Putting in screens on the gutter openings could stop leaves and twigs from getting into your system.
Damage Roofing Materials
Roof materials are beyond just shingles. Nature is one of the major causes of failing roofs. You cannot do much about exposure to the sun and climate elements, but then you need to respond quickly when the damage of that sort arises.
Having your roof inspected by a roofing expert for damaged roofing materials could save you loads of money.
Holes and Punctures
The entirety of climate to local wildlife could leave puncture marks, holes, or even scrapes in a roof. Where there is a small bird drilling holes in the eaves or a professional roofer walking above the roof, the tiny damages could build up over the years, affecting the underlying wood or even exposing it to dampness, which could cause it to decay.
Over time, your roof can build up cracks, ridges, and sores. Seeing such destruction depends on the kind of roof you have installed. Built-up roofs are roofs made from numerous layers that cover a flat surface and are predominantly vulnerable to cracking and blistering.
Roof materials could shrink, and when they do, it can result in different roof problems, such as cracking, corrosion, and the damaging of important components like flashing. Shrinkage predominantly affects roofs covered with EPDM (synthetic rubber membrane) and all other roof coverings.
Snow and Ice Damage
Snow and ice can damage almost any roof. Snow and ice liquefy into the water, which eventually leaks under your shingles. And once it refreezes, you will be surprised because the ice beneath your roof could hold up against the shingles or flashing and even lift them away, making gaps through which more water or snow could enter.
No roof is fully safe from nature, and one of the most common forms of damage caused by trees. If a tree crashes into your roof, you’re definitely in trouble. Also, the tree branches that rub against your roof from time to time, could scratch the surface of the roof and wear it down later. It is safer for your roof if trees are clipped, so no branches are on top of your home.
Moreover, you might want to consider cutting down trees that pose a serious threat to the integrity of your roof.
Pooled water on top of your roof could result in problems in the long run, particularly on flat roofs. A fast solution to this is to form narrow areas over the surface of the roof. Little slopes will let the water run off, keeping your roof free from water damage.